Infra Selfie…

A week has passed of Ramadhan already. Things are going fast, and I'm trying to cope with the new timings. So far my body is doing nice job but it requires more sleep as usual. Anyway, this is the story of my life I presume.
Meanwhile, my timing seems compressed, specially that Ramadhan this year comes in the beginning of summer, which leaves me with few hours at night to do all I can do before trying to sleep (again) to get up next morning for another course of... misery. However, I had some time to do some stuff at least…

Infra Selfie

I've been trying this for 2 weeks; shooting myself (i.e. taking a selfie not with a gun) while using the infrared filter. My infrared filter is B+W with threshold of 650nm, which makes it penetrable by Reds beside infrared. Anyway, this is suitable so far for some shooting using Speedlites.  They are good sources for infrared rays by the way.

In my previous trials, I used some low f-numbers, and hence a shallow depth of field and a blurry image most of the time. I had to lower the f-number (around f/5.3) to allow more light to get in while shooting the 2 speedlites (580EX II and 430EX II) at full power. Narrowing the aperture yielded no image at all!
This time, however, I changed positions and I got the speedlites as close as possible to my face; it is dangerous somewhat - you can feel the heat wave rushing on your skin after each flash strike. At this point, I've set the f-number to f/8 (and I would go to f/10 if I had the chance to). The results were sort of acceptable. I know some people who liked these shots! Future model? Nah... not with this belly.

While processing the set of images, I was reluctant to fix the white balance as I usually do with infrared images. Mostly, I would just use the Infrared profile specifically made for such images and fix the saturation and contrast starting from there without adjusting the white balance. This kind of filter gives a pleasant hue and shade of Reds. Just for the sake of it, I did try to adjust the white balance as on the image above (and that would shift the colors to almost black and white image).
I faced some problems in processing like banding because of the excessive saturation at some point, but at the end I got to find some good shots. My dream now lies in shooting selfies using the Kodak gel filter or something like it, which has a threshold of 1000nm (more opaque to visible spectrum). That would require more flash power! If my face almost got burned for using speedlites at close distance to my face, imagine what kind of setting should be used if I used such filter of 1000nm threshold? Of course, with rising the ISO level too…

Syllabary

I've been working slowly with my Geltani project but at least I did something. Simon Ager, author of Omniglot, seems interested in this script, and thus I'm going to prepare a template for it in order to be displayed on Omniglot. Even though he did send me some ready-made templates to be used, but they don't fit into the scheme of Geltani (Geltani is Chinese-like script). Moreover, the templates he sent me were for alphabetical scripts, while Geltani contains a syllabary system along with the characters (somewhat mimicking the Katakana system to Japanese).

Scan of the syllabary
Click to enlarge.

I've managed so far to adjust and fix some issues with the syllabary system and I think I'm satisfied with it right now. The plan now is to make crops out of this scheme and put every character in a table. It's going to take a really long time I suppose! Probably the best way to do this is to make a document file and then save it as HTML.
What is left now is to re-check the phonetic values for some characters; something I was planning to do all the week but couldn't!

Finale

A lot in my brain right now; sketches, photos, designs. I don't know from where I should start. In the meantime, I've continuing my previous work with re-making old panoramas (specially those from my 2010 trip to Ireland, Co. Tipperary) to try to find more projections.
There is a pending trip to take place in September, to Oman, which would last for around 4 days doing photography projects there with the group, and I'm thinking already of having a real vacation after this trip. Not to Ireland this time, I don't think so, but it's just an idea and I have to think about it fast.
My mind and time is occupied as I'm doing an Arabic blog post about macro photography for Arabic readers - dedicated to beginners. I was hoping to post this one Wednesday but seems the amount of information included and the images needed there would need another week of working out. The only time I work on this Arabic article is when I'm, well, at work. Beside that, I'm trying to do some of the doodles and sketches that I've planned before. Not many pleasant results so far! I didn't like my own work…
So much here and so much there. I feel like breaking everything and just leave it all behind me here. This mind is cuffed to many things. I think not much is left for me here already…

Ag Éirí
(rising)

Geltani Galore…

Well, this is a quick wrap, since I didn't post anything last week (and in fact I was not going to this week as well!).
Life is going slowly in this heat. Man, I wish I can sleep and wake up and it is winter again. Not much action with my camera lately but I do have some plans that are on my waiting list. Been trying to do some clumsy DIY stuff with a Kleenex box (yes, tissue paper box) and make it as a light modifier for my flashgun (Canon 580EXII), but it was a failure so far. Never mind anyway, it was not a big deal but something to get active a bit. I have other plans in my head now.

The poor box.
Let's not go about how I made it. Should be obvious.

Ramadhan is here already, so blessed and happy Ramadhan. I can't deny my fear about it though; there shall be a lot of exhaustion more than it is there already, specially with students in college (where I work) are still on their summer classes. It surely means traffic jams galore, and with Mom's dialysis schedule, the situation is not pleasant at all this year. I don't think I would have much time for my own projects till the month passes.

Meanwhile anyway I've been keeping myself a bit busy with my Geltani project and I'm already starting to write a brief about it in order to send to Omniglot. I've sent an example already to the author just to see how it looks (because the look of the script is important if it is to be added to the website). In addition, I'm still fine-tuning some aspects about Geltani, and changing some previous rules.

Transliteration: jewno uwibañwoš', wá núc zing reñy'ču vá zing ča-xungči
Meaning: men are like bagpipes, no sound they give until they are filled.

No need to go on and explain the transliteration and the sounds of these characters. I'll keep it for another time hopefully. As I was rummaging back through my notes about Geltani, I've decided to re-adjust the Genitive case and make it closer in concept to Japanese. I had to look into this matter specifically because I'm planning to name Geltani in its own speakers' tongue as "people of rock." Modeling that on the Japanese (の) [no], the order should be then as "rock-of people." The character which will act as the  Japanese (の) [no] will sound as /xə/ (with IPA "x" sound as Scottish or German "ch").

Genitive character
/xə/

There are other things to refine as well, like the syllabary system that comes with Geltani (something close to Katakana in Japanese). However, I'm trying to keep the language agglutinating (like Turkish) as much as possible. Geltani is not supposed to be a tonal language like Chinese, but it seems I would have to refine the values for some syllabic combinations further in order to make them distinguishable in sound. If that does not work as such, I would probably have to go ahead and hit the tonal approach just a bit.

Goals

Now with Ramadhan being here already, I do have a list of goals, but of course without a specific time table to do them. I'm thinking of seriously stopping the blog during this time until the month is over. But I'm not sure about this decision yet. Some of these goals include:

1. Doing a B&W panorama out of JPG images instead of RAW (as a challenge).
2. Doing an Infrared panorama from a bridge (previously done in a normal mode).
3. Doing more doodles and sketches and convert them to vectors. A project I stopped long time ago was to make a set of sketches about a specific theme and convert them all to vectors and upload them to stocks.
4. Maybe infrared portrait with high flash pulses.
5. Staying alive.

Bridge-O-Rama
Where I want to do an infrared panorama.

I've been busy with the group and specifically with some aspects of the website (raising it up after being down), beside working on getting an international recognition for our group (or club so to say). All that kept me a bit busy as well and away from thinking about my camera. But hopefully I'm coming back to this soon.

The past few weeks had been full of headaches and sleeping problems (though I've always had them but the rate was higher this time). Now, wishing I did indeed sign for a leave for Ramadhan already…

Blessed Ramadhan folks…

Yggdrasil…

This blog post contains a QTVR which uses QuickTime plugin to be displayed. The page might load slowly, and might not be displayed properly on tablets or smartphones. 

Summer is officially here. It is already 43°C (~109°F) at daytime. I wonder how much that would be around "real" Summer? I can't even bear the idea in my mind with getting a splash of melancholy more than it is already.

I've recently finished an eye check-up (last Sunday), which is a regular one done every 6 or 7 months since I've been diagnosed with Retinitis Pigmentosa (RP). Sounds a bit of good news now when the doctor said that the situation seems stable. I do have my problems already in walking around specially in confined spaces, but compared to my eldest brother, I can well take care of myself so far. Probably the Vitamin A treatment is doing its job in slowing down the process of decay of the retina cells. Hopefully!

Success with Mess

I've finally managed to stitch the tricky panorama taken from Al-Hamra tower about two weeks ago. The panorama was tricky because of the moving subjects AND stable subjects in the scene; adding to that, the hardships with moving the remnants of the tripod in some projection styles.

Inside Al-Hamra

Of course, the series must start off with the regular and the most humble project: the flat spherical. The major problem here was with slide 7 specifically (center, to the right a bit). There were major stitching errors in that spot specifically and there was a "gap"; because slide 7 was removed completely. Adding any bit of it would scramble the whole area, thus I had to remove the culprit and try to mend it manually. In a small size it would be fine to look at I presume (and the QTVR looks good I believe). The tripod remnant in this version is not a problem since it is at the bottom, and a simple crop was enough to remove it.

By The Crown

The next "play" was to change the perspective. When trying the little planet projection, I personally didn't like the results, thus I changed my mind directly to see what the tunnel projection would yield. The result was By The Crown. One of the major problems here is the fact that, despite my attempt to centralize everything, but, as usual, things should go astray when the final image is made! I've spent quite a time with By The Crown trying to wrap, mold, and fix the axes to meet my vision. I wasn't lucky in other styles though!

İmparatorun Avlusunda
(in the emperor's courtyard)

Before heading to the little planet projection, I paid a minor visit to the Mercator projection (usually this is one of the "last" projections to explore when I do panoramas). The shape of the straight lines in the architecture and the uneven ceiling of the place did not help in achieving a good twisted panorama, adding to that the fact that the group members do appear in a crucial part of the panorama. Thus, a simple vertical panorama using Mercator format (to have a proper width instead of a slender one) is all I could do for the time being. Yet, I allowed myself to break the normal attitude when tone-mapping the HDR panorama and tried to add more drama to the scene by using "harsh" techniques, so to say., which caused specific halos around some elements in the image.
Yet when moved to the little planet projection style, there was not much to be done in this projection. It did not yield interesting results as much as the tunnel projection did. However, changing the viewing angle in that projection was enough (in fact the tunnel projection is just a planet projection with 180 degrees reversal).

Παλάτι του Ηρακλή
(Palace of Hercules)

Changing the viewing angle in the planet projection format did in fact yield 2 interesting results as we'll see; with 180 degrees of difference between the two. The first attempt, Παλάτι του Ηρακλή, is probably the most interesting panorama in the collection so far. When posted to 500px website, it was ranked as "popular" in just 30 minutes from posting it. This panorama caused me a lot of headache when trying to fix the axes of the image to make it as symmetric as possible, and removing the remnants of the tripod was a great deal of time and effort and yet it is not a perfect render still - it might look good only in the small version. Here too, I've decided to push the HDR tone-mapping further and try to make a harsh impact on the eye by exposing the black levels and increasing the contrast (and the vibrance of colors too). The tiles of the ground were hard to keep in symmetry and I believe they were not meant to be symmetrical in the first place! I think I'll revisit this panorama soon for B&W conversion or so…

Yggdrasil

The second, or the opposite angle for Παλάτι του Ηρακλή, was named Yggdrasil. Originally I was thinking of something related to spiders, but it crossed my mind that Yggdrasil is more interesting! Yggdrasil is the tree of life in the Norse mythology. To add a twist to Yggdrasil, I've added a Photo Filter to the original HDR panorama before tone-mapping. It was a magenta tint filter. However, I have to say I somewhat regretted this decision, as working with the panorama later on proved to be harder than I thought and the tones were problematic. I'm seriously considering re-tone-mapping this panorama without this tint. Anyway, it did reach the "popular" status in 50 minutes after posting it to 500px website. Removing the tripod remnants from Yggdrasil was relatively easier compared to Παλάτι του Ηρακλή, but it did take a long time as well, and discrepancies did occur in that area later on when tone-mapped and processed. The visual impact was sealed with sharpening the panorama with a bit of overdose. In this panorama, I couldn't hold things in a square format as it was with Παλάτι του Ηρακλή before, because some features at the bottom were not adding much to the scene (and cropping from the sides a little did help eliminate some stitching errors and avoid me the hassle of fixing them). These are the panoramas done from that specific location so far…

QTVR-wise, there was only one QTVR of course, since it is all about one panorama. Again, when making a QTVR right now, I don't have to worry much about the nadir point. I've started to adapt the logo approach at the nadir point mostly right now. However, because of some recent developments, I'm thinking more about changing the style in which I represent my QTVRs on the web; even though it might takes up some learning curve in the field of coding and webpage development…

 

The difference aspect here though, is the fact that I didn't render the QTVR at the size of 400x300 pixels as I usually do for this blog - but it was rendered here in a larger size and the window is fixed at 400x300 size; I think this way is better for representing the details better in such a small space. At the bottom of this QTVR you can find the information about the location.

Revision

In the past two weeks I've been ignited again to have a peek into Chinese and Japanese, specifically after my follow up with an old cartoon: 三国志 (Jap: Sangokushi), or Romance of Three Kingdoms; a famous work of Chinese literature made into an anime.
Digging further into the names of the characters and trying to understand more the tonal system used in Mandarin Chinese, made me sweep through the language as a whole and specially some of the sounds and notations used in the Pinyin system to note down Chinese. Some of these sounds used in real Chinese are not implemented in Geltani, but I did add some Semitic sounds already to Geltani which made it a Sino-like language with a Semite touch. Some of these sounds are: voiced and voiceless alveolo-palatal fricatives. I think applying the tonal system is out of the question here since this would complicate the matters further, but it would be nice to understand AND comprehend the tones by hearing them in spoken manner. I know, things like that sound natural to a Chinese person probably, but as an Arab, tones are used to distinguish a style of speech (as in most languages, e.g. in question or sarcasm), but to use tones solely to distinguish meanings is pretty much a harder task for someone without trained hearing. This ignites in me a question of whether or not such languages do help, naturally, their speakers in musical endeavors. Would someone learning Chinese get, by nature, the capability to distinguish musical notes more easily? Is learning Chinese easier relatively for someone who deals with musical tones?
Anyway, there might not be a space for extra sounds in Geltani already, but I think it is worth some consideration. I do have some plans regarding some revision for the Geltani - and I know, I've been saying this for long now, but most of the processes regarding this project are mental and not noted down! I think I must start building a webpage for it soon and send it over to Omniglot and see what happens.
By the way, probably I should stop using the "semite" and "semitic "notation by now since lot of people, as far as I know, are reluctant to use them because they are remnants of the Orientalists who based their classifications upon the Bible majorly, and less on scientific evidence. However, in Arabic books that I've encountered so far, some authors tend to call this language group as Arabic / Arabian languages or Ancient Arabian languages sometimes, referring to the fact that most of those who speak such languages, specifically Akkadians (the first Semites to arrive in Mesopotamia and lived along side with the Sumerians) were immigrants from the Arabian peninsula, and hence it is logical to call such group as Arabian languages as a whole. Anyway, in modern Western styles, such group is called mostly Afro-Asiatic languages as I reckon.

Finale

Feeling a bit down since I couldn't accompany the group to Dubai this week to attend PhotoWorld Expo. Too many things on my plate that I couldn't really afford to go and come back just for 3 days. Anyway, many positive feedback are coming already and I'm glad that they've made it as the only Kuwaiti corner in the expo.
I've got visiting visions in my mind about writing some short story of some sort (many topics crossed my mind actually), beside writing poetry as well. Yet, when I look at the time I do have and all the things that I must attend to, makes me scared to even think about adding one more task into my daily scheme and schedule. For this reason, I might have, at some point, to give up some of my time that I do spend here in front of the PC and processing images, as well as dwelling on some social medias aspects, to pour that time down on other sides of my own self. 
Meanwhile, I'm trying to re-collect myself; my judgements, actions, reactions. Many things to go through in my life, as I get more isolated. Sometimes, leaving and relocating yourself in some far away places might be the only solution available, to gain some respect that you deserved in a long time…

Dull Times...

Another dull week, with few serious work on any front. Summer just began and I wish it's over already. It does sound sometimes as if all my problems start with summer. Anyway, work is minimum, and by work I mean my camera, not my "job". I don't have much respect for this place right now actually.
On the other hand, I'm slowly starting to figure the headache of the Irish visa (again). Things should be sorted out as soon as possible though, and first of all, I have to set a plan for the dates of traveling and such. Thank God the passport is valid till next year and I don't have to do anything about this. If they keep a record of visitors to the Republic, probably granting my visa would be a piece of cake... ah well.

Macro

It was a day in which I brought my camera to my workplace to take shots of the beautiful garbage containers that were left beside my workplace for months now. After taking these shots, I've decided to check out the garden on the side of the building, which was colorful and blooming just some months ago - when we had some "weather". Even though it's filled with dead blooms and plants now, it could be a good target for some abstract work as well.

لب (Core)
Canon EF 50mm + 30mm ET, f/7.1,
100^-1sec, ISO640.

Because this was not planned initially, I didn't bring a tripod with me, and I guess this is obvious if you check the ISO in the specs of لب (Core). After many disastrous trials, accompanied for handshake AND slight breeze, I decided to go even beyond ISO400. The sun was fine but in such a macro level (with the hep of extension tubes of course) and such a shake, a compromise had to be made. And truth be told, I'm not sure how it became f/7.1 either! It was supposed to be fixed on f/8; seems I've nudged the dial without noticing!
I'm quite satisfied with the details in لب (Core) despite the out of focus regions which might somehow plague the scene a bit. The geometry of the details inside the dead core is to my eyes satisfaction, and the overall resolution is quite good even after cropping, so that even the fine hair on the side were pleasantly sharp at 100% view. Let's call it, a "strike of luck"! Cropping though did take some time to be decided, and yet I'm still not satisfied about it. Probably the law of thirds inside the square was due and the heart of the core should have been placed in one of the "power points".

تلك (That One)
Canon EF 50mm + 12mm ET, f/3.5,
320^-1sec, ISO400.

Seeing how long are the stems carrying these dead blooms, I changed the extension tube from 30mm to 12mm. The next shot I was planning needed some perception of depth, as I was planning to shoot the stem from above. The problem here though, I must use extension tubes to allow for close distance focus (50mm's closest focusing distance is about 45cm, or about 0.18 in.). However, I think that تلك (That One) needed more than just close focusing distance. It needs more angle of view to show some curvature in a clear way (and I'm not going to use the old 18-55mm here). The situation literally left me puzzled. However, with some sharpness to a distance object (thanks to AF!), probably the depth is depicted somehow. What was left was simply squaring and adjusting to the law of thirds.

البركان الناعم (Soft Volcano)
Canon EF 50mm + 30mm ET, f/6.3,
100^-1sec, ISO400.

Back to the 30mm extension tube. This time, my eyes captured a small "volcano" formation inside a dead core, just like the first shot above in fact, but this time, the point was protruding more. In البركان الناعم (Soft Volcano) the aperture was set mainly by "sense" and not by using any rules of thumb that are usually taken in macro photography. It is almost a rule that in macro shots, the aperture should not be any less than f/8. Anyway, as I was trying to make a compromise between the shutter speed and the ISO with the aperture (I was using Av mode, without tripod, without flash), f/6.3 seemed reasonable. The final result is a perplexing combination of out- and in-focus areas which makes it hard to specify exactly where is the plane of focus, as it has rendered the shot somewhat in 3D; to my eyes at least. There were several shots in fact, because I was using the burst mode (which I like to use in times of shake!), but this one seemed the finest. The protruding point from the core was not sharp enough though, unfortunately. Again, it was squared and fitted into one of the "power points" according to the law of thirds.

I'm not sure why I did name these shots specifically in Arabic in the first place, but to some sense, it did sound more "plausible". The squaring of all of these shots sounded "natural" to me since there are lot of unwanted details and the area of interest is pretty small compared to the whole frame; a whole rectangle wouldn't look "elegant" so to say, besides, it would have added more space than planned to the shot. It is also a better choice, as it seems, to rounded objects like these dead cores!

Kill It!

With minimum photographic activity, I'm still going on with Black and White exploration with old photos. Nothing special for this week in fact, except for an interesting encounter with an old panorama taken from the Arab Organization Headquarter (February, 2013), namely the Tiempos Andaluzas.

Tiempos Andaluzas

In this panorama, as you can see, there were lot of reflections because of the polished floor and, naturally, the glass facades everywhere. To me it was one major point in the weakness of the whole panorama; if these reflections were combined with symmetry, the situation might have been different at least. However, when converting to B&W (and adding a red tint), some of these reflections were simply "killed;" in the sense of being camouflaged with the surroundings. This helped a bit here and puts forward a new venture of thought and considerations when processing panoramas. B&W render could be a savior at some point beside being a touch of art!

Comparison between the colored and the B&W versions.
Notice the black arrows on the colored version.
Click to Enlarge

As you can see, not all reflections could be eliminated, naturally, but this was a good start. Moreover, the veins of the marble floor were emphasized further because of the tint. The original tint was pretty red. However, with going on with processing, the general tone changed to (dark) sepia somewhat, but I don't think it's that bad after all. I think some tint does help on pronouncing some details in white areas more than white does at times.

Finale

Well, I was supposed to talk a little about some work with Geltani conlang, and supposedly do a recording, but I'm canceling this for now as I had some technical problems concerning recording these events. I've done a primary check up for translating the UDHR and I have to say, it does sound a jaw twisting venture; not only a tongue twister! However, I'd rather train myself on producing these sounds rather than changing the value assigned. The main work though remains on putting key rules (to myself) for producing the glyphs for words, as well as adding some touches to the grammar and words manipulation. This is important because the conlang is largely based on Arabic, and Arabic script is an abjadic script, which means we might have more than one word with the same letters, but different in vowels. Vowels (short ones that is) are not recorded in Geltani.
I've been doing my homework, and sent some email asking for help with the Arabic phonology which I'm trying to understand. However, no reply as of yet. Seems I'm not good at getting responses anyway! This matter, which I reckoned to be a simple task, swept through a learning curve of phonetics and anatomy of the mouth just to understand how I speak!

After successfully sending and printing two of my photos, I've decided to add them to printing gallery on my website; which is something I didn't update in a while! The two photos are almost of the same size (around A2 with the margin) and would cost around 35K.D. here. Still thinking of easy ways to send these prints for benefit outside but having a strong currency and the lack of means to transfer money easily, makes this project a failure for the time being. PayPal wouldn't let me receive money with my current location and credit card.

Print Screen of two pages from my website after update.

My life is getting busier now and I had to stop fasting for the time being, in hope that it would empower me to do the hanging tasks on my schedule. It's not a language or a camera matter only, but a complete sweep through my life and the capability to organize it. Just to think of all the preparations I have to do just before traveling gives me a shiver in the spine really, but remembering that it is something that I must do, makes me calm down a little. I'm starting to get careless and careless about everything around me, day by day...

PolaPeel...

OK. This one is done in a hurry. I barely had something to post this week, and I'm still trying to adjust my time after the end of Ramadhan. I was going to cancel the post for this week just as a... gift to my own self, for my coming birthday on the 17^th, but then there was this tiny project that I hated to delay more than it is delayed already.
Furthermore, my appetite for photography was on hold because of some migraines and sleeping disorders, as usual. However, I was lucky to work in a hurry and somehow thoughtlessly on some project that I was planning to do some time ago: Polaroid Peel.

PolaPeel

Back in March this year, I was invited to attend the rewards ceremony of HIPA (Hamdan International Photography Award) in Dubai; an event that took place a week before Mom's sickness. There, they distributed a package containing a polaroid camera for the ceremony attendants. I have to say I'm so excited to have such a camera out of the ordinary digital cameras line, and I'm hoping to get the chance to use it one day for some nice shooting. Unlike the digital stuff, with such cameras as it is with film cameras, it is a one click business.
Anyway, I've decided to work with this polaroid camera to do a peeling effect. Most of the time I was trying almost regular objects with cylindrical or semi-cylindrical shapes and I thought now it's the time to try out some real irregular shapes with sharp edges.
In the beginning I wanted to check the potential of PTGui to do the job despite my doubts about it. A prime stitch confirmed my doubts and such objects won't get along with the slit-crop method that I usually use in PTGui.
After this failure, I thought it's about time to get back to the classic methods of manual blending of layers to make up for such a peel. In the beginning it was frustrating as how to align and how to start, but things just went on (with errors of course). The job took around 2 days, and the work took around 48 layers stacked together. The original working PSB file (Large Document Format) sized more than 5GB! I've decided here not to include the back portion of the camera body because then I would have a problem with the lens at the front - I want this to be in the middle of the image and adding the backside would disturb the balance.

Polapeel

There are many issues that are still going through my mind about this simple project and probably I should put them in specific points:

• In such instances, it is even better to use the flash on top like I used to do before. It would shorten the exposure time significantly, and lessen the troubles with the shadows below subject.
• I'm not sure about the specific technique to blend. Technically, I was actually aligning different features on both sides and blending manually (using layer masks). Would there be a specific form of approach for this?
• Would I need indeed a shot every 5^o? Or it would be enough to take a shot every 30^o or even 45^o for the object? Probably it also depends on the type of the object I'm trying to peel? Surely, if it works for 45^o the work load would be significantly lower, but I don't know if it would work. Only experiments would do.

These were the main points that I've been thinking of, and I'm sure there are more on the list in the future as I go on doing such stuff!
However, these experiments seem hazardous a bit because I'm straying away from the typical photography venue and concentrating on something typically called special effects and not a real style or school of photography. Yet, I think it is my desire to create the unusual that is always driving me to such experiments, including panoramic photography.

Finale

The engine is still greasing, or trying to be so, even after the end of Ramadhan. If I was tired during Ramadhan for waking up early and picking Mom to the dialysis center, it's doing to be a doubling of efforts when the jam starts with schools return and students' come-back to my work place. Yet, the routine and the schedule with Mom's duties do not change. Ever.
I've been reading more into Turkish and discovering more about its grammar, which is somehow inspiring for my Geltani project, but I won't apply everything I read blindly. I admit, in the past 2 weeks, Geltani was of the least concern to me as I was chasing after my camera, and Mom's health. All what I need is some time organizing, and some physical health. In hope that Geltani would be in front of my eyes again and soon, probably, get published. Now, with no new books to read in my free time at work, I hope I can dedicate this time for Geltani.
My readings into the Turkish language lead me, by virtue, to be listening to a lot of Turkish music (and I do like such oriental music long before I try to understand the language). In musıc, though, there are always those strings that should not be touched that mangle in the heart. Isn't it a wonder, how something makes you so sad, yet you keep listening to it all over again?

Stop!

Another week without much activities with photography, but I've finally got my new notebook for conlangs. I've started pinning notes about basic elements of Geltani for the time being. Along with Geltani, there is a syllabary that I had to develop to write foreign names to Geltani. You can imagine this as being a Japanese writing Katakana along with Kanji. Will discuss that later.

I do have my own plans and pace for my own photography venue. With Mom's schedules taking 3 days from my week for dialysis and also because of my fasting right now for the month of Rajab (which I hope it would continue till the month of Sha'ban and then into Ramadhan), I barely find the power and the time to work with my camera outside or even think of something. Under these circumstances I've decided to abandon the Redbull project. Despite the fact that I've already prepared a plan to take 5 images telling a simple story for a A Day in Kuwait, yet the deadline is on May 20^th and I barely did something. However, there were other reasons that made me neglect this project:

• The deadline is too close as stated above and I don't have enough time with my current responsibilities.
• Some of my plans might require permissions and I'm absolutely in no mood to have a conflict with authorities or any hardships concerning that kind of activities outdoors.
• The conditions of Redbull were not so clear and frankly, I don't feel safe to submit my work to them.
• I had enough from time pressure and contests.

However, just for the fun of it (and who knows I might do these ideas later) I did sketch a plan for the process with 5 images and each image telling some phase in a typical day in Kuwait:

1. Morning: Sunrise; the beginning of a new day in Kuwait. This idea is already reflected in one of the panoramas I've done back in 2011.

   

   Towers of The Rising Sun

2. Traffic Jam: This is the phase of going to work. My plan was to shoot some traffic jam from a pedestrian bridge over some road, but having the problems I had in the past, I think my chances that this would pass safely is like 50% of even less. In periods of traffic jams cops are usually spread over the place and a person with a camera is not a favorable spotting.
3. Busy at Wok: For this phase, I was planning to shoot some office with a busy look (scattered papers, scattered furniture...etc). In fact, thinking about it right now, I might as well use one of my own panoramas which I've done in my own office in my work place including myself in the shoot!

   

   Busy at Work!

4. Evening: This is the period of family and friends visiting and the typical Diwaniyyah I'd say. For this idea, I was planning to do silhouettes by the help of my speedlites and some colored gels to light the background blue (reflecting evening time) while people laughing in the foreground. Might do this later even after abandoning the whole idea of the contest.
5. Night: This particular time I would have used it to reflect the safe atmosphere that we live in despite all of our problems. Initially my idea was to take a shoot of someone sleeping with the Towers of Kuwait in the background, but if this is done in the public, God knows what hurdles I have to put up with, specially with unnecessary people in the scene. I'm not a people's person and not so social, beside that, I might need a special permit to do such a thing in the public. The only alternative here is to do it with props in some studio or a room; yet, that won't have a great impact on the viewer I believe.

It was quite a brainstorming session for me to get out with some of these ideas, but I can't say I'm completely satisfied. Moreover, in the current time, I'm trying to prepare a dinner party if I should say, as a gratitude for friends in the photography group and out of the group as I've promised before - Just a tiny gift for Mom being out of the hospital. It should be on a Saturday, but apparently it won't the coming Saturday as there is no time for any kind of preparations right now.
Meanwhile, I'm looking further for other agencies of stock photos to submit my images to. I've long abandoned Fotolia and Bigstockphotos, while things are going smoothly with Canstockphotos and Mostphotos. One of the targets had been 123RF and Featurepics, but still looking for more outlets. I'm not that optimistic about Dreamstime, but I might try it again just for a change. Here and there, who knows what might come next from such websites.

Geltani Glossa:
As I've mentioned above, I've been working lately with Geltani further more and recording notes and trying to establish some basic elements of the conlang. Plurals, numerals, and many other things are all on papers right now, and when it's all over, I would need to do those digitally somehow but for sure without any fonts. It might be scanning all the way (and I'm having hard time with the scanner already!).

Scan of my notes with some scribbles of Geltani.

There are still though some basic stuff not settled down, like the sound of some driving letters (sorry folks, can't explain this all over again, it's in other posts already!). Some innovations and some regular rhyming must be added to the list to finish this task, I believe. On the scan on the left you can see some of the basic grammatical cases that I've been trying to settle down with. They had been changed from time to time and I think it is now the time to finish it one and for all. The plural is achieved by repeating the last syllable in the word, and drawing a special character for plurals. I'm not quite happy with repeating the last syllable method but this is the best I could think of for the time being. Would there be a change? Maybe!
One thing to be dealing with as well is creating a suitable transliteration system for pronunciation.

Primary Geltani Syllabary

On the other hand, I've sketched a primary syllabary for writing foreign names into Geltani. I say primary because these shapes are still under consideration. The system is like a mix of syllabary and abugida. I didn't want to put on more loads of vowels, thus I've pinned only 3 types of vowels and whenever the vowel is to be long, a marker is added on the syllable, while if the syllable is to be still (i.e. without a vowel) then it is done as in abugida systems; a marker is added below the syllable (as you can see in the scan). If there is a vowel in between (e.g. as "A" in way) then it is approximated to the closest vowel(s).
To make some twist in the whole conlang of Geltani, I've decided to make it sound like Chinese, yet with more sounds and consonants that aren't originally in real Chinese, mainly of Semetic origins like ħ [Arabic: ح], and there is some thought about adding the sound of Ayn [Arabic: ع] as well, but not now.

The complete picture of the grammar and the order sentence is still fuzzy in my brain but for some reason I'm not sure of, I do like the order of the sentence used in Sumerian and Akkadian (notice that those are REAL languages!), which is SOV (subject-object-verb). But I have to see further into this matter after the basics of the writing system are settled.
I've avoided, so far, working on several other conlangs (like Betenic and Bulughman) just to concentrate my efforts. Multi-tasking won't work here I guess, specially with such time schedule in such a mess.


Finale:
When life gives you lemons, make lemonade. This is what they say. It seems for the time being that I would conduct more experiments in the field of tabletop photography and product photography. Even though I've never considered it before because of the equipments that I must have with me most of the time to take most of such shots, but it seems the only solution available in my case; to try to innovate something and avoid being outdoors too much unnecessarily - in locations that bring problems. On the other hand, who knows, I might as well make a good idea and impression with such field to open up the fields for some financial gains in the future. However, I don't tend to be over optimistic in such matters. I just need to think of what to do next.
Some of my plans for the near future include shooting a censer, a silhouette (as mentioned above), objects dipped in water with some special effect and maybe custom bokeh effect. This is some of the ideas that I've been noting down in my photography note. Would there be someone interesting and interested in what I think, what I do, and share? That, gonna take such a long time as it seems... if any.

Free Fall...

Struggling struggles and fighting fights, all of that to keep coming out with new ideas for photography and other aspects of conlangs, amid the increasing responsibilities concerning the house. Well, I guess I'm glad I'm not married at such moments.
At least in this week, I got to test the trigger partially, and under the light of the new book I'm reading (and almost finished) I've got more insight about my mistakes. More to come below.

Source: Amazon

As I've mentioned in my previous post, I've ordered 3 books, and they are here already. Instead of reading 2 at a time as I usually do, I decided to concentrate better on one book at a time. The first one to pick was the Tabletop Photography book by rockynook. I would classify the book as general (because under tabletop photography, you can enroll product photography or food photography... etc) but it has some nice tips about the lighting and how to do some stuff with emphasis on low costs. It is really an encouraging book despite the lack of some technical data when dealing with the light but, anyway, I think the depth of such topics is out of the scope of this book. I've already almost finished the book!
While reading the fore mentioned book, I was working on my own experiment which is also my first real trial for the new trigger since I got it back in March. I've pointed some of the lacking points in my previous post and some of them (if not all) were very true. From my side, I had my own problem too with my own tools already (other than the trigger that is) and also, I didn't learn quite enough about such type of photography.

The setting I've worked with in my experiment. Sorry about the bad quality but this is what you get when you ask a non-photographer to take a photo with his iPhone. I think my brother never heard of the word "focus" before!

As you can see from the blurry image above, my brother never heard of the word "focus" before as it seems. My setting was simple (and the trigger is placed on camera) while I needed a long cord to connect the sound sensor to the trigger. The sensor was placed on the surface of the black sweep (if you can notice, it is a small tiny black box on the left side of the sweep, which is your right side). Luckily, I had such cord long time ago when I used to record some music for a friend!
I've used my both speedlites here on both sides but I think this is a wrong step. I will explain further below in form of points for easy reading. My target was to freeze the falling moment of some marbles.

Free Fall
Canon EF 50mm, f/7.1, 2500^-1sec, ISO100.

Many trials went on to check for position and light levels as well as the depth and the shutter speed required to freeze the moment. Believe it or not, a 800^-1sec shutter speed was not enough to completely freeze the moment, and some marbles kept on showing motion blur. Yes, I'm a physicist (or so my B.Sc. announces) but I don't have the time to count for the falling acceleration and velocity and check it out with my camera's shutter speed; besides, I really hated mechanical physics! However, let's move on to the points:

• I've used some marbles randomly here and with different sizes. The problem with Free Fall above is that two big marbles dominate the scene in the foreground and this is a bit distracting. It is a trial and error job after all but it might be better to use only one large marble or leave them all at the same size, I think.
• The positioning of the speedlites on two sides (but pointing in different directions) was a mistake I believe. Under the light of my new reading, I think the best method to conceive the feeling of glass in the air is to have a reflector on one side and reflecting the light off it. I think a narrow strip of some white board would do. I think this way would also help me on concentrating the power of the light in one direction to get an intensified effect from both speedlites under the operation of High-Speed mode, which reduces the brightness severely. This is way much better than scattering the power of the two speedlites in different directions.
• The prop or sweep I've used was not completely black, or let's say it reflects bright tones when light strikes it. Besides that, simple cleaning from dust particles was not enough for clearing the view. Anyway, I do recognize the importance of capturing a glimpse of the ground to emphasize the sense of falling, but this ground such as the one in Free Fall is not a favorite.
• With trials, it was evident that there is a time gap between capturing the sound and then sending the signal and triggering the camera - this is natural of course, but with time and trials, it seemed the time gap between these processes is getting bigger (bigger in terms of micro or milliseconds).
• Maybe it is not very clear in this situation, but probably I should start using a black board over my lens when I shoot up close to avoid any reflections from the camera onto the glass.
• The low level of the settings in general is not helpful and I think they better be up a bit. 

These were some of the points that crossed my mind so far and bearing them in my mind, I might work it out again some time later. I'm just glad that I've tried the trigger at least and I'm ready to write a review about it on B&H website. This is like a duty for me. In the mean time I have to think of something to do about the increasing number of tools and how to organize my room!

Linguae Artificiales:

In the course of developing some thoughts about the future of some of these conlangs I've created, I've decided to keep a regular notebook. Probably, a notebook for every conlang I'm trying to work on from now on. I've had this idea since I've been looking at my scattered leaflets on my desk at work with all scribbles for Geltani and figured it is really easy to lose track of ideas made before! For example, I'm still not sure of the possessive articles that I've made already nor I'm sure about the grammatical cases! I have to organize my stuff.
On the other hand I was thinking if it is possible to work on 3 conlangs altogether? Seems huge step but who knows! Geltani, Bulughman and Betenic; and probably Caqobian as well - an artificial language spoken hypothetically by Alexander, and the plan is to make it go along with Greek somehow. Ideas, ideas, ideas. This is all what I can promise of. If only I can get my brain to organize itself as well...

Geometria...

Here we go, another week, with not much of activity, but at least I'm trying to grease the engine slowly. In the meantime, I do have something for mathematics and geometry still going on in my mind so far since the time when Mom was in the hospital, and that made me think of some weird stuff - simple, but weird I'd say. I'll come to that later on. Also, the group sent me (or maybe I should say put me in front of the cannon) for an interview on TV regarding aluminum prints. Ironically, I have nothing to do with this, except that I was "supervising" the printing process for the expo back in March. It went well (and short) but I have problem getting and viewing the video from the TV channel's youtube channel, mainly because they used a copyrighted topics and issues in their show which made the episode unwatchable in Kuwait! Thank you guys!

As for Mom, her health is progressing, specially that she started to head to the kitchen often and THAT is a very good sign in general, yet, personally and for my own state of mind, I won't feel comfortable until the number of dialysis processes that should be done per week is reduced. At the current time, we have to pick her to the dialysis center (luckily near my working place) 3 times a week, and each session takes around 4 hours. As far as I know (and some by logic), doing dialysis on the long run can cause more hibernating to the kidneys (because dialysis is doing what the kidneys should do) and that would weaken the body even more, beside weakening the immune system naturally. Two things that I don't wish Mom to be acquainted with.

Grease:

Source: B&H

It's been a month or a bit more since I've got the Ubertronix Strike Finder Elite for triggering the camera (or flash as it seems), but unfortunately I'm still unable to work out any ideas to work with it. Sure, water drops and splashes seem to be an obvious target but they are cliches by now. I was trying to find something new or some creative venture within these two topics (water drops and splashes). Since I couldn't think of any, I've tried at least to do some testing for the device.
The Ubertronix seem to work fine except for few awkward delicacies!

• The wires of the sensors (for sound and motion) are short, but probably can be lengthened by some means.
• The device contains no controls for the sensitivity of detection (specially when it comes to sound detection).
• The port used for connection to the camera also bears "Flash" on it, but in the instructions manual there is no explanations involving triggering flashes instead of cameras. Could that be with the help of the PC port in the flash itself?
• Motion and Laser detection seem a bit unpredictable. 
• The sensors for sound and motion with their short cord are also hard to be placed. Probably duct tape is due in some situations. They are in a bulky rectangular box shape and because of the sturdy cord it can be hard to make them stay flat on a table for example or make them still on their sides.

These might be some awkward points, otherwise, the device works in a wonderful way. I think even the Laser detector can be used as a motion detector but I'm not sure of that yet and I need to do more experimentation.

Rising Eye
Canon EF 50mm + 12mm & 35mm tubes, f/11, 400^-1sec, ISO100.

On the other hand, I was trying to catch some eyes with the help of extension tubes but my trials with other people were in vain, so I've tried to do it on my own eye. Of course it is not like a piece of art (specially with all these reflections of flashes on the iris). I've been fascinated with the lines formed on the iris and I thought maybe the best way to do this is to use extension tubes. Using speedlites, on the other hand, was problematic but it was a must; otherwise no light is available in such narrow corner! Doing the whole thing on my own eye is a really hard task, specially with using an external portable monitor to judge the focus and the composition. After many shots, I've decided to pick Rising Eye to work on its RAW and filter it a bit more. I like this version mainly because the iris is situated in the corner (and I cropped a little from the top right corner to emphasize this fact) and it breaks the monotonous look of the iris being in the middle of the frame (and I did take shots that way as well). I've never imagined myself going so deep with the macro field, but it might be time to plan for some rails for fine adjustments?

Geometria:

With my sudden amusement with geometry and mathematics (not something new in fact), I've been playing around with circles and rectangles, along with squares of course. Needless to say I had some crush on Schläfli and his symbols.
From that perspective, I've been thinking of ways to organize my composition or the way I see things in my pictures. I'm quite a believer in what Bruce Barnbaum mentioned in his book The Art of Photography about the myth of the law of thirds; something that I would beheaded for if I talk about in here inside the photographic community in Kuwait! Bruce, however, had his own points and logic indeed. Anyway, for me, I do tend to think of the law of thirds and the golden spiral as means to merely organize the objects in the scene but not a critical tool to get the attention of the viewer. I'm aided with this point by the common belief among photographers that Rules are made to be broken in general!
Stemming from this point of view, I've been working around to base some order based on geometrical means rather than visual means opposed to the theory of the thirds and the spirals.

Red: Golden Spiral.
Blue: Law of Thirds
Green: Diagonal-Circles

My first trial was to draw quarter circles from the corners of a 3:2 rectangle; with 3:2 being the usual ratio for imaging sensors (at least for the APS-C cropped sensors?), and the radius of these circles is half the length of the diagonal. Thus, the quarter circles would meet at the center point of the rectangle, and by drawing the diagonals of the rectangle we can specify the points of intersection between these circles and the diagonals (green on the image above). Now, would these points make an interesting composition? This, I wouldn't know without trials. However, I do imagine it is a good starting point for circular (specially overlapping circles; e.g. in a rose) subjects. But the intersection points seem a bit far away from the center which makes me skeptic about its use in general, but again nothing can be talked of without trials.

Red: Golden Spiral.
Blue: Law of Thirds.
Green: Diagonal-Circles.
Yellow: Central Circle.

Another thought then occurred to me is to draw a central circle within the 3:2 rectangle in such a way that the center of this circle is shared with the rectangle, bearing in mind that the radius should not exceed the height of the rectangle (the y-axis length). Then, drawing quarter circles from the corners like before. This one diagram is unusual for me because it shows here more than the usual 4 intersections; in fact we have 8 intersections. However, four of these intersections don't seem to be practical (the two central intersections up and down) because they touch the edge of the frame itself. Probably, after removing the 4 central intersection points, we are left with the other four that are close to the diagonals and work more in harmony with the law of thirds and the golden spirals (yet far away from the diagonals-circles intersections). I guess placing a subject in these points won't make much difference visually since it is close to the other perspectives. However, those points close to the edge of the frame which I've omitted in the beginning might make a difference if they are to be included in the rules of the composition. Notice here that I'm talking about placing a subject in ONE and only ONE of these intersection points, whether it may be law of thirds, golden spirals or any other perspective I've been mentioning so far; but what if some of these perspectives, specially this last one (Central Circle method) would work as a whole, meaning that intersection points are to be used all together to organize subject(s) in the scene and not one subject only? You think this would be visually interesting? Again, only trials would prove if it's appropriate or not.

Red: Golden Spiral.
Blue: Law of Thirds.
Green: Diagonal-Circles.
Yellow: Central Circle.
Grey: Diagonal-Central Circle.

By the end of my thoughts chain I was almost going to forget about the result of intersecting of the diagonals with the central circle. Not strangely, these grey points are in harmony with other perspectives like the thirds and the spirals, as well as the central circle intersecting points. In fact, I think the four perspectives or divisions: thirds, spirals, central circle and diagonal-central-circle do all make clusters for one position at a time around the center of the frame, and if we have one big subject within the frame it would be covering these four points in one corner at one time probably. This leaves two main questions of how affective these perspectives are when it comes to the Diagonal-Circles perspective (Greens) and the central intersections of the Central Circle (those closer to the edge). Well, as for the central circle perspective, we might, as I've mentioned before, work with the 8 points altogether (or 4 of them at a time) to place a certain subject. The greens, however, might have been tried before from my side without noticing like I did with one of the shots for some roses and petals.

Die Sanfte Ringe

Probably Die Sanfte Ringe reflects in a way how the Diagonal-Circles perspective would work - but I have to say here that this shot was taken long time before thinking about these different geometrical plays within the 3:2 frame. Yet, it does coincide somehow as a subconscious drive I presume! Notice that the Rising Eye mentioned before does somehow imply the Diagonal-Circles perspective and again it is as if it is a subconscious drive within my mind to do it that way, specially when it comes to circular subjects or rings and loops. There is a difference though between the Rising Eye and Die Sanfte Ringe in that the former is indeed a 3:2 rectangle, while the latter is a square. Not sure yet how to think about the visual impact in between these two but one step at a time - I think there is a plenty of time to think about these crazy geometrical means. As for now, I need to work a bit more on more serious stuff!

Libros!

I've exhausted all my arsenal of books by now (and only one or two short stories are left). I've been working on my queue of Arabic books that I've purchased some months ago from the books fair back in November. Back then, I did purchase some stories just to rest my mind little bit from the technical aspects that I usually wander on. Now my eagerness is back to the technical side and I've decided to purchase 3 new books from Amazon. As usual, I've decided to take up 2 books about photography and 1 about science (specifically archaeology).

Source: Amazon

One of the books that I'm eager to read is Lens Design Fundamentals by Rudolf Kingslake. The book is cheap and in fact I was going to order another one which costs around US$150, but judging from the contents, I believe the latter is way too advanced for me for the time being (it appears to be too academic in style). Thus, I changed my mind and picked this one since it's cheaper as well as it is aimed for beginners. I'm not sure where does this lead me but I've always wished to gain more insight about the make of lenses and where the power lies in the design after all.

Source: Amazon

 The second book deals with Tabletop Photography, by Cyrill Harnischmacher with some twist about using speedlites. From what I reckon about its table of contents, it is dedicated for people who don't like to work in studio environment, and eager to use some tricks with their speedlites. Not sure how much I will gain from such a book, but I'm pretty sure that I won't be disappointed as it is the case with most of rockynook publishing.

Source: Amazon

The last book is something attracted me mainly because of some formulae inside! The Handbook For Classical Research, by David H. Schaps, seems to be a general overlook about humanitarian sciences and how mathematics merge into them for purposes of studies. I was looking for a pure archaeological book with pure scientific prospect, but unfortunately most of the books I've found were novel-like and don't deal much with the scientific and mathematical side. This book, however, bears much about studies and how to do them and how to analyze data in such fields like anthropology and archaeology, in different sub-fields. This is, at least, what I've regained from reading the table of contents and some few pages in between the covers. I don't think I would be disappointed here though - anything that has some numbers in its language can be quite interesting in the current time!
The only problem that remains now is how to manage my time between these 3 books. I think I'd read the rockynook issue first, because they can be over with quickly, usually!

Conlang:

In the meantime, I'm not forgetting my beloved conlang(s) in such frustrating times, but actually I'm not putting ideas onto papers or notes - but simply everything is going on in a mental note. I need to enhance my memory about some basics about the Bulughman conlang as well as Betenic.
There had been an idea of a funny or a comic version of English as a conlang. I thought about it long time ago and proposed it to Simon Ager, the author of Omniglot.com, but as he said, the priority is for conlang with conscripts (i.e. artificial and new scripts) while my version was simply using modified Latin alphabet. From that point I've been thinking of inventing a new conscript indeed. Priorities for now, however, is for the Geltani project that seems endless. Sometimes, I do think I need a wife not to love or share dreams together, but simply to organize my time. Might be a plausible idea, but I don't think I would call it a marriage, can I?

العين التي رعتني
The Eye That Cared For Me